Chapter 5: Setting Up And Configuring The Wrvs4400N Wireless-N Router - Cisco QuickVPN - PC Administration Manual

Setting Up and Configuring the WRVS4400N
Wireless-N Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
The Wireless-N router works right out of the box with the default settings.
However, to change these settings, you can use the router's web-based
configuration utility.
You can access the web-based configuration utility via a web browser (such as
Microsoft Internet Explorer or Mozilla Firefox) from a computer connected to the
same network the router is connected to.
This chapter includes the following sections:
• "Accessing the Web-Based Utility" on page 37
• "Navigating the Utility" on page 38
• "Setting Up Your Wireless-N Router" on page 44
• "Configuring Wireless Settings" on page 76
• "Configuring Firewall Settings" on page 96
• "Configuring the ProtectLink Gateway service" on page 112
• "Configuring the VPN Settings" on page 113
• "Configuring the QoS Settings" on page 126
• "Configuring the Administration Settings" on page 131
• "Configuring IPS Settings" on page 143
• "Configuring the L2 Switch Settings" on page 149
• "Viewing Status" on page 160
5
36