Replace An I75 Handset - ASCOM I75 User Manual

User Manual
Ascom i75 VoWiFi Handset
• DEVICE - GENERAL (optional)
- Time zone
• DEVICE - UNITE
- IMS IP address - set to 0.0.0.0 to disable messaging
- IMS phone number - automatically set by PDM
• AUDIO - GENERAL (optional)
- Dialling tones pattern
• PROTOCOL - GENERAL
- VoIP Protocol
- Coder Configuration (the voice encoding scheme used in the gatekeeper)
Set one of the following depending on the selected VoIP protocol:
• PROTOCOL - H323
- Gatekeeper IP address (the VoIP Gateway with the PBX application that works as
gatekeeper in the system).
• PROTOCOL - SIP
- SIP Proxy IP address
C.4

Replace an i75 Handset

To replace an i75 handset in the system, perform the following steps:
1 If using an old i75 handset perform a factory reset using the PDM, Windows
version.
2 Associate handset with the entry that shall be replaced, or run a template with the
basic settings for the site, see
3 Give the handset access to the WLAN appliance according to
Access to the WLAN Appliance
4 Switch on the handset.
The system may ask for call number and password the first time the handset logs in.
The password can be the same for all VoWiFi handsets in the system, or individual,
for example for shared phones.
2006-09-22/ Ver. B
C.3.1 Recommended working flow:
on page 55.
TD 92319GB
on page 55.
C.1 Give the Handset
56