Delete A Message; Messaging Between Handsets; Send A Message To Another Handset; Send A Message To A Predefined Destination Address - ASCOM I75 User Manual

User Manual
Ascom i75 VoWiFi Handset
Note: The option "Delete" is not available for a message with request for answer; a
message that has not been acknowledged can only be deleted from within the message
list.
5.2.4

Delete a Message

Delete a received Message
Press the "Delete" when the message is displayed or marked in the Message list. The
question Delete message? is shown; press "Yes".
Delete a Message stored in the Message list
Open the message list by pressing
Navigate in the list with
question Delete message? is shown; press "Yes".
5.3

Messaging between Handsets

Messages from one handset to another is done from the menu entry "Messages". It is also
possible to assign a Soft/Hot key or Service to "Send message"; see
on page 39 or
A Soft/Hot key can be programmed to "send message" either to a predefined address or
to any address in the system. The handset will ask for destination address if it is not
predefined.
A Service can be programmed without a destination address and you will then be able to
use it for sending messages to any handset within the system.
An incoming message is immediately displayed and the identity of the sending handset is
shown on a separate row. Sending messages is a system dependent function.
5.3.1

Send a Message to another Handset

Press the Menu Soft key, mark "Messages" and press "Select". Mark "Send message"
and press "Select". Enter the destination address or fetch it from the Local phonebook by
pressing the Soft key with the Contacts icon; press "Select". If the address is not entered,
an error message will be displayed. Enter text and press "Send". Sending will be displayed
as a confirmation of the transfer.
5.4

Send a Message to a predefined Destination Address

Predefined destination addresses can be set for a Hot key, a Soft key or for a Service. See
9.5.9 Edit a Hot key
Service on page 36.
Press the Soft key, or press and hold the Hot key, or select the Service. Enter text and press
"Send". Sending will be displayed as a confirmation of the transfer.
5.5

Interactive Messaging

Interactive Messaging (IM) is a function that extends basic messaging. It makes it possible
for a user of a handset to access information from a client application in the system.
2006-09-22/ Ver. B
, or from the menu, see
. The selected message is marked. Press "Delete". The
9.4.3 Edit a Service on page 36.
on page 39, 9.5.8 Edit a Soft key
TD 92319GB
9.2 Messages on page 33.
9.5.8 Edit a Soft key
on page 39 or 9.4.2 Create a new
20