Flow Control; Uart (External Modems Only) - US Robotics 002605-00 Manual

Flow Control

For hardware flow control (highly
recommended), select RTS/CTS.
For software flow control, select
XON/XOFF.
NOTE:
Disable the type of flow control
(hardware or software) that you are not
using.

UART (External Modems Only)

1.
In DOS, at the Windows directory type:
MSD
2.
At the next prompt, type:
C
P III: S A: I
ART ECTION
O F
NSTALLING THER AX
Find the UART Chip Used line and match it
with the COM port column that your modem
is attached to. That is your UART type.
If this is your UART...
16550*
16450
8250
*All Sportster internal modems have a 16550 UART.
NOTE:
14,400, or 12,000 bps serial port rate if
offered. Your modem will NOT work correctly
with any of these settings. Fix or lock the
serial port (baud) rate (if it's referred to as
autobaud, select OFF).
/D S
ATA OFTWARE
DO NOT select a 28,800,
Select this
serial rate
115.2 or
57.6 Kbps
38.4 Kbps
19.2 Kbps
111