How To Insert The Modem - US Robotics 002605-00 Manual

P
ART
TIP:
Grasp the shunts with a tweezers
or needle-nosed pliers. DO NOT grasp
too firmly, as you may crush the shunts. If
a shunt seems stuck, gently rock it back
and forth as you lift. Do not touch any
other part of the modem or your
computer with the tweezers/pliers.
5.
Move the shunt to the new setting.
The COM port setting can involve one
to three shunts. The four possible COM
port settings are as follows:
COM 1
COM 3
I: S A: I
ECTION NTERNAL
COM 2
COM 4
M I
ODEM NSTALLATION WITH
Unlike most COM port settings, the
IRQ setting involves only one shunt.
Simply move the shunt to the pin labeled
with the IRQ you want.

How to Insert the Modem

NOTE:
modem, write its serial number in the
space provided on the first page of this
manual. (You'll find the serial number
underneath the bar code on the white
sticker on the modem and on the box
the modem came in.) If you place a call
to our technical support department, the
technical support representative will ask
you for the serial number. This will help
him or her identify the type of modem
you have.
W 3.
INDOWS X
Before installing your
17