US Robotics 002605-00 Manual page 17

P
ART
6.
When you see this screen, click on the
Finish button to exit ComTest.
Go to "What to Do with ComTest's
Recommendation" on page 14.
Testing an Installed Modem
If there is a modem already installed in your
computer, you can determine its COM and
IRQ settings by selecting the Test an installed
modem option. Follow the instructions on
12
I: S A: I
ECTION NTERNAL
M I
ODEM NSTALLATION WITH
screen until you see the screen that tells you
"Testing is complete." This screen will also tell
you which COM and IRQ settings your
present modem is using. These are the settings
you want to use for your new Sportster. Write
the settings down in the spaces provided on
the first page of this manual.
Turn off your computer and remove your
present modem.
If your present modem is using
COM2/IRQ3, go to "How to Insert the
Modem" on page 19.
If your present modem uses settings other
than COM2/IRQ3, go to "How to Change
the Factory Settings" on page 17.
W 3.
INDOWS X