US Robotics 002605-00 Manual page 48

P
ART
1.
Turn off your computer and unplug it from
the electrical outlet.
2.
Unplug any peripheral devices (printer,
monitor, keyboard, mouse, etc.) from the
computer.
TIP:
Before you unplug anything,
label the cords or make a sketch of how
things are connected. This can be helpful
when you plug things back in later.
CAUTION :
electric shock, make sure your computer
and all peripheral devices are turned off
and unplugged.
I: S B: I
ECTION NTERNAL
To avoid risk of
M I
ODEM NSTALLATION WITH
3.
Remove the screws from your computer's
cover and then remove the cover, as shown
in the following diagrams. Your computer
may differ in appearance from these
diagrams, but the basic principle for
removing the cover should be the same.
Refer to your computer manufacturer's
manual if you need further instructions.
W 95
INDOWS
43