US Robotics 002605-00 Manual page 50

P
ART
You'll have to apply a little pressure to seat
the modem properly. Sometimes a gentle
back-and-forth motion helps fit the modem
all the way into the slot. If you feel
resistance, the modem may not be properly
lined up with the slot. Do not force it into
the slot. Remove the modem and try again.
6.
Once the modem is in place, screw the
modem firmly into place using the screw
that you removed in step 4.
7.
Put the computer's cover back on and
fasten it with the screws.
8.
If you currently have a phone plugged into
the wall jack you're going to use for the
modem, disconnect the phone's cable from
the jack.
9.
Plug one end of the phone cable that came
with the modem into the TELCO jack at
I: S B: I
ECTION NTERNAL
M I
ODEM NSTALLATION WITH
the rear of the modem. Plug the other end
of the cable into the wall jack. (If you want
to use a telephone on the same line as the
modem, plug the telephone's cable into the
modem's PHONE jack.)
W 95
INDOWS
45