US Robotics 002605-00 Manual page 20

P
ART
Then return to this point in this manual to
continue.
After disabling COM2, you can use the
COM2/IRQ3 setting.
Write "COM2" and "IRQ3" on the first page
of this manual and go to "How to Insert the
Modem" on page 19.
If ComTest tells you that You do not have
any available COM ports and/or IRQs
We recommend you disable COM1 or
COM2. When you disable one of these COM
ports, you can use it and its default IRQ for
your modem. Go to your computer
manufacturer's manual.
Find out which socket is COM1 and which
is COM2.
If nothing is plugged into either port, you
can disable either of the ports. Your
I: S A: I
ECTION NTERNAL
M I
ODEM NSTALLATION WITH
computer manufacturer's manual will tell
you how to disable the COM port.
If one of the ports is being used by an
accessory, choose the unused port. Note if
the port is COM1 or COM2. This is the
port you should disable for your modem.
If both ports are being used, you may be
able to attach one of the accessories
elsewhere so that you can disable that
COM port for use by your modem. The
accessory will not work once its port is
disabled.
If you've disabled COM1, you can now use
the COM1/IRQ4 setting. Write this setting
down on the first page of this manual. Go to
"How to Change the Factory Settings".
If you've disabled COM2, you can now use
the COM2/IRQ3 setting. Write this setting
W 3.
INDOWS X
15