Step Two: Connecting The Isdn Cable - US Robotics 000698-13 Getting Started Manual

Step Two: Connecting the ISDN Cable

1
After you have selected the correct cable, connect the male DB-25 end
of your serial cable to your Courier I-modem and the other end to a
serial port on your computer.
If you have an IBM-compatible PC, connect the male DB-25 to your
Courier I-modem and the other end to COM, RS-232, or with symbols
such as IOIOI,
If you have a Macintosh, connect the male DB-25 to your Courier I-
modem and the other end to
Note: Write down the number of the serial port to which you connect
your Courier I-modem. If your serial ports are lettered instead of
numbered, A is COM1 and B is COM2. If you cannot find a serial
port, consult the documentation that came with your computer.
2
Connect one end of the phone cable to the wall jack and the other end
to your Courier I-modem port labeled U.
3
If you have Model U and a telephone that you'd like to connect to
your Courier I-modem, plug its cable into your Courier port labeled
PHONE.
4
Plug one end of the power adapter into your Courier I-modem and
the other end to a standard AC power outlet.
5
Switch your computer and modem power on.
You are now ready to configure your Courier I-modem.
5-4
, or .
(modem port) or
Courier I-modem Getting Started Guide
(printer port)