Table of Contents
Advertisement
This chapter explains how to configure and test the I-modem using the
Configuration Manager software.
If the computer to which you've connected the I-modem cannot run
Windows applications, follow the steps in Chapter 7, Configuring With AT
Commands.
Overview
Configuration Manager
The I-modem Configuration Manager is designed to help you make the
ISDN settings to your I-modem and test whether you have a working
connection with the central-office switch.
Configuring the I-modem
Before you can make any calls, you need to configure the I-modem to
work on your ISDN line. If you haven't ordered an ISDN line, see
Chapter 3, Ordering ISDN Service.
Install and run the Windows Configuration Manager software shipped
with the I-modem. The Configuration Manager runs on Windows 3.1,
Windows 95, Windows NT, and Macintosh.
What You Should Know
Directory Numbers
Directory Numbers (DNs) take the form of ordinary seven- or ten-digit
telephone numbers. Be sure to leave off the area code from your DN.
Using the Configuration Manager
Using the Configuration Manager
Chapter 6
6-1
Advertisement
Table of Contents
