If You Are Using Unix, Linux, Or Aix - US Robotics 000698-13 Getting Started Manual

If You Are Using UNIX, Linux, or AIX

Linux has a built-in communications software package called minicom.
You can obtain minicom on the U.S. Robotics FTP site (ftp.usr.com) in the
usr/bin directory.
For instructions about how to set up your UNIX®, Linux, or AIX
communications software package, visit the U.S. Robotics Totalservice
web site at http:/ / totalservice.usr.com.
These are the standard port names and settings:
Outgoing Calls
/dev/cua0
/dev/cua1
/dev/cua2
/dev/cua3
Use the setserial command to tell Linux about any nonstandard
COM/IRQ combinations that you may have set using your Courier's
jumpers. Setserial also selects serial port speed and I/O port address.
Other Operating Systems
Incoming Calls
/dev/ttyS0
/dev/ttyS1
/dev/ttyS2
/dev/ttyS3
Port IRQ
COM1 4
COM2 3
COM3 4
COM4 3
I/O Address
03F8
02F8
03E8
02E8
10-5