How To Tell If X2 Is Enabled In Your I-Modem; Obtaining X2 - US Robotics 000698-13 Getting Started Manual

How to Tell if x2 is Enabled in Your I-modem

If you aren't sure whether x2 is enabled in your I-modem, use the ATI7
command to display product configuration information. If x2 is enabled
on your I-modem, the following information displays:
USRobotics I-modem Configuration Profile...
Copyright, 19xx-96, U.S. Robotics. All rights reserved.
Product type
Options
Fax Options
Clock Freq
Eprom
Ram
Supervisor date
DSP date
Supervisor rev
DSP rev
Serial Number
OK
Note: Dates, serial numbers, revision numbers, and Clock Frequencies
may vary. The most important line is the "Options" line, which lists
support for x2.

Obtaining x2

For information about how x2 works, visit the x2 web site at
http:/ / www.usr.com/x2
Courier I-modem Getting Started Guide
US/Canada External
HST,V32bis,Terbo,VFC,V34+,x2
Class 1,Class 2.0
{Clock Frequency}
256k
32k
{Date}
{Date}
{x.x.x}
{x.x.x}
{serial number}
14-2