Connecting The Adsl Ethernet Modem - US Robotics USR8550 Installation Manual

Connecting the ADSL Ethernet Modem

Connecting the ADSL Ethernet Modem
The following graphic is a representation of your system topology with the ADSL Ethernet Modem.
1
Connect one end of the RJ-11 phone cord to the DSL port on the rear of your ADSL modem. Connect
the other end of the RJ-11 phone cord to your wall phone jack.
2
Connect one end of the Ethernet cable to the ENET port on the rear of the ADSL modem. Connect the
other end of the Ethernet cable to the Ethernet port on the NIC in your PC.
3
Plug the AC power adapter cord into the PWR jack at the rear of the ADSL modem. Plug the AC power
adapter into a standard wall outlet. The ADSL modem is always supplied with power, so there is no
power switch to turn on. The PWR LED on the front panel of the ADSL modem will be illuminated if
power is being supplied to the modem. If your PC is not on, turn the PC on now.
2