Step One: Configuring With Dip Switches; Step Two: Choosing A Serial Cable - US Robotics Courier V.Everything Getting Started Manual

Step One: Configuring with DIP Switches

You may need to change your DIP switch settings. See Chapter 7,
Configuring Your Courier with DIP Switches and Jumpers, for more
information.

Step Two: Choosing a Serial Cable

Before you can begin installation, you need to purchase an RS-232 serial
cable. Use the following steps to choose the correct serial cable:
1
Look at the back of your computer for a port:
If you have
An IBM-compatible PC
A Macintosh
Refer to your computer's documentation to determine where the port
is.
3-4
Ports may be labeled this way
COM, RS-232, or with symbols such
as IOIOI, , or
(modem port) or
Courier V.Everything Getting Started Guide
.
(printer port)