This chapter explains how to control TurboPPP with AT commands.
Overview
TurboPPP allows your I-modem to use both B-Channels to send and
receive data over the ISDN.
TurboPPP includes the following features:
This feature
PPP/ML-PPP (Multilink
PPP)
Dynamic Data Bandwidth
Allocation (DBA)
Point to Point Protocol (PPP) / ML-PPP
Your Courier I-modem now supports Originate and Host Mode PPP/
ML-PPP. Host Mode ML-PPP allows you to set the I-modem to accept
ML-PPP calls. Originate Mode allows PPP/ML-PPP calls to be made from
the I-modem.
Determining TurboPPP Settings
To do this
Obtain an overview of TurboPPP
settings
Configuring with AT commands
Configuring TurboPPP
Allows the I-modem to
Accept PPP/ML-PPP calls
Save money by only using the second
B-channel when it is need for data
transfers, and then dropping the second
B-channel when it is not needed
Use this command
ATI16
Chapter 11
With AT Commands
11-1