Get Zone 3 Status - Lexicon RV-8 V2.0 - SERIAL PROTOCOL DEFINITIONS REV 1-8 Manual

Lexicon
Min:
Video Sync:
Data Type:
TRUE:
FALSE:
input

7.3.23 Get Zone 3 Status

This command is a request to RV-8 for current Zone 3 Status. RV-8 will respond with "Zone3
Status Packet".
7.3.23.1 Command Packet Description
Application Header:
Command MC_CMD_GET_ZONE3_STATUS 0x3F
Data Count 0
Application Data:
7.3.23.2 Zone 3 Status Response Packet
Application Header:
Command MC_RESP_ZON_STATUS
Data Count 5
Application Data:
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
7.3.23.3 Data Description
Zone 3 Volume:
Data Type:
Max:
Min:
Assigned Zone 3 Input:
Indicates the Zone 3 input that is currently assigned for the Zone 3 outputs.
Data Type:
Definition/Conversion: Appendix F RV-8 Input Ids
Zone3 Mute Active:
Data Type:
TRUE:
FALSE:
Reserved
-16 (0xF0) (Full Back)
Boolean.
RV-8 has detected Video Sync for current video input
RV-8 can not detect Video Sync for the current video
N/A
Zone3 Volume
Assigned Zone 3 Input
Zone3 Mute Active
Reserved
Zone3 Balance
Signed 8-bit integer (2's compliment)
+12 (0x0C) (12 dB)
-80 dB (0xB0) (-80 dB)
Unsigned 8-bit integer.
Boolean.
Zone 3 Outputs are active.
Zone 3 Outputs are not active.
RV-8 Serial Communications Protocol
0x00
0x95
0x05
nn
nn
nn
0
nn
34