Table of Contents
Advertisement
Lexicon, Inc.
RV-8 Serial Communications Protocol
7.3.23 Get Zone 3 Status
This command is a request to RV-8 for current Zone 3 Status. RV-8 will respond with "Zone3 Status
Packet".
7.3.23.1 Command Packet Description
Application Header:
Command MC_CMD_GET_ZONE3_STATUS 0x3F
Data Count 0
Application Data:
7.3.23.2 Zone3 Status Response Packet
Application Header:
Command MC_RESP_ZON_STATUS
Data Count 5
Application Data:
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
7.3.23.3 Data Description
Zone3 Volume:
Data Type:
Max:
Min:
Assigned Zone 3 Input:
Indicates the Zone 3 input that is currently assigned for the zone 3 outputs.
Data Type:
Definition/Conversion:
Zone3 Mute Active:
Data Type:
TRUE:
FALSE:
Reserved
Zone 3 Balance:
Data Type:
Max:
Min:
7.3.24 Set System Volume
This command is a request to the RV-8 to set the system volume with the value in this packet.
© 2005 Lexicon, Inc. All rights reserved.
N/A
Zone3 Volume
Assigned Zone 3 Input
Zone3 Mute Active
Reserved
Zone3 Balance
Signed 8 bit integer (2's compliment)
+12 (0x0C) (12 dB)
-80 dB (0xB0) (-80 dB)
Unsigned 8 bit integer.
Appendix D RV-8 Input Ids
Boolean.
Zone3 Outputs are active.
Zone 3 Outputs are not active.
Signed 8 bit integer (2's compliment)
16 (0x10) (Full Right)
-16 (0xF0) (Full Left)
Printed on: 07/26/05
0x00
0x95
0x05
nn
nn
nn
0
nn
31 of 72
Advertisement
Table of Contents
