Set Parameter Notification By Id - Lexicon RV-8 V2.0 - SERIAL PROTOCOL DEFINITIONS REV 1-8 Manual

Lexicon
7.3.18.2 Data Description
ParamId:
Data Type:
Max:
Configuration
7.3.18.3 Data Validation
If ParamId exceeds the its maximum value, the RV-8 will ignore the command and
transmit a DC_NAK command with an error code DC_INVALID_PARAM_ID.
7.3.18.4 RV-8 Value String Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
Data[3-23]
7.3.18.5 Data Description
Same as Paragraph 7.3.14.2

7.3.19 Set Parameter Notification by Id

Request to RV8 to enable or disable transmission of the RV-8 parameter change notification for a
given parameter.
7.3.19.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
7.3.19.2 Data Description
ParamId:
Data Type:
Max:
Configuration
Enable/Disable:
Data Type:
TRUE:
FALSE:
7.3.19.3 Data Validation
Unsigned 16 bit integer.
Max Parameter Count as reported by the RV-8 Unit
Response Packet in 7.3.39.2
MC_RESP_PARAM_VALUE
24
ParamId (LSB)
ParamId (MSB)
ParamType
Value[0 -20]
MC_CMD_SET_PARAM_NOTIFICATION_BY_ID 0x3B
3
ParamId (LSB)
ParamId (MSB)
Enable/Disable
Unsigned 16 bit integer.
Max Parameter Count as reported by the RV-8 Unit
Response Packet in 7.3.39.2
Boolean
Enable transmission of parameter notification
Disable transmission of parameter notification
RV-8 Serial Communications Protocol
0x92
0x18
nn
nn
nn
nn nn
nn...
0x03
nn
nn
nn
30