Mc-8 Set Parameter Notification By Id - Lexicon MC-8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-4 Manual

Lexicon, Inc.
MC-8 Serial Communications Protocol
ParamId:
Data Type:
Max:
6.3.28.3 Data Validation
If ParamId exceeds the its maximum value, the MC-8 will ignore the command and transmit a DC_NAK
command with an error code DC_INVALID_PARAM_ID.
6.3.28.4 MC-8 Value String Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
Data[3-23]
6.3.28.5 Data Description
Same as Paragraph 6.3.24.2

6.3.29 MC-8 Set Parameter Notification by Id

Request to MC-8 to enable or disable transmission of the MC-8 parameter change notification for a given parameter.
6.3.29.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
6.3.29.2 Data Description
ParamId:
Data Type:
Max:
Enable/Disable:
Data Type:
TRUE:
FALSE:
6.3.29.3 Data Validation
© 2003 Lexicon, Inc. All rights reserved.
Unsigned 16 bit integer.
Max Parameter Count as reported by the MC-8 Unit Configuration
Response Packet in 7.3.39.2
MC_RESP_PARAM_VALUE
24
ParamId (LSB)
ParamId (MSB)
ParamType
Value[0 -20]
MC_CMD_SET_PARAM_NOTIFICATION_BY_ID 0x3B
3
ParamId (LSB)
ParamId (MSB)
Enable/Disable
Unsigned 16 bit integer.
Max Parameter Count as reported by the MC-8 Unit Configuration
Response Packet in 7.3.39.2
Boolean
Enable transmission of parameter notification
Disable transmission of parameter notification
Printed on: 04/01/03
0x92
0x18
nn
nn
nn
nn nn
nn...
0x03
nn
nn
nn
38 of 80