Set Communication Configuration - Lexicon MC-8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-4 Manual

Lexicon, Inc.
MC-8 Serial Communications Protocol
6.3.19.2 Communication Configuration Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
6.3.19.3 Data Description
Data Word Bit
0 0
0 1
Acknowledge Enable:
TRUE Indicates the MC-8 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the MC-8 will not transmit any positive Acknowledge Notification messages.
Parameter Change Enable:
TRUE Indicates the MC-8 will transmit any parameter change Notification as specified in the
FALSE Indicates the MC-8 will not transmit parameter change Notifications.

6.3.20 Set Communication Configuration

The Set Communication Configuration Command allows the serial port user to set up the various serial port/
protocol configuration parameters.
6.3.20.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
6.3.20.2 Data Description
Data Word Bit
0 0
0 1
Acknowledge Enable:
TRUE Indicates the MC-8 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the MC-8 will not transmit any positive Acknowledge Notification messages.
Parameter Change Enable:
TRUE Indicates the MC-8 will transmit any parameter change Notification as specified in the
FALSE Indicates the MC-8 will not transmit parameter change Notifications.
© 2003 Lexicon, Inc. All rights reserved.
DC_RESP_COM_CONFIG
1
Configuration Register 0
Definition
Acknowledge Enable
Parameter Change Enable
The MC-8 will always transmit NAK error notification messages.
Parameter Change Notification Message.
DC_CMD_SET_COM_CONFIG
1
Configuration Register 0
Definition
Acknowledge Enable
Parameter Change Enable
The MC-8 will always transmit NAK error notification messages.
Parameter Change Notification Message.
Printed on: 04/01/03
0x8C
0x01
nn
0x30
0x01
nn
28 of 80