Mc-8 Parameter Notification By Id - Lexicon MC-8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-4 Manual

Lexicon, Inc.
MC-8 Serial Communications Protocol
6.1.4.3 HOST Response
The MC-8 does not expect any response from the HOST.
6.1.4.4 Supported System Parameters
The following parameters will be supported by this Parameter Change Notification:
Parameter
Current Effect
Mute
System Volume
Balance
Input Selection
Zone 2 Volume
Zone 2 Balance
Zone 2 Mute
Bass
Treble
Loudness
Tilt
Menu Background On/Off
For Input Parameter Change Notifications the Input Value is a MC-8 to MC-1 input mapping, as shown in
E MC-1 Input Id's.

6.1.5 MC-8 Parameter Notification by Id

MC-8 will transmit parameter change notifications if they are enabled using the command described in
(MC8_Set_Parameter_Notification_By_Id). If a parameter value is changed due to any user action or system action
the MC-8 will transmit the current value of the parameter that is changing.
6.1.5.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
Data[3-23]
6.1.5.2 Data Description
Same as Paragraph 6.3.24.2
6.1.5.3 HOST Response
The MC-8 does not expect any response from the HOST.
6.1.5.4 Defaults
The following Parameters Notifications are Enabled in the MC8 default state:
© 2003 Lexicon, Inc. All rights reserved.
MC-8 Parameter Name
PROGRAM
MUTE
VOLUME
LR_BALANCE
INPUT
Z2_VOL
Z2_BAL
Z2_MUTE
BASS
TREBLE
LOUDNESS
TILT
MENU_BKGND
MC_PARAM_NOTIFICATION_BY_ID
24
ParamId(LSB)
ParamId(MSB)
ParamType
Value[0 -20]
Printed on: 04/01/03
MC-1
ParamId(V4.00)
1
3
5
6
7
154
156
157
167
168
169
174
190
Appendix
6.3.29
0x05
0x18
nn
nn
nn
nn nn
nn...
11 of 80