Mc-8 Set Zone2 Volume; Mc-8 Set Zone2 Left/Right Balance - Lexicon MC-8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-4 Manual

Lexicon, Inc.
MC-8 Serial Communications Protocol
6.3.37.2 Data Description
EffectId:
Data Type:
Definition/Conversion:
6.3.37.3 MC-8 Response
The MC-8 will load the desired effect.
6.3.37.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-8 will ignore the command and
transmit a NAK command with an error code DC_INVALID_DATA.

6.3.38 MC-8 Set Zone2 Volume

Commands MC-8 to set the Zone 2 volume with the value in this packet.
6.3.38.1 Command Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
6.3.38.2 Data Description
Value:
Data Type:
Max:
Min:
6.3.38.3 MC-8 Response
The MC-8 will assign the value from the packet to the Zone 2 volume.
6.3.38.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-8 will ignore the command and
transmit a NAK command with an error code DC_INVALID_DATA.

6.3.39 MC-8 Set Zone2 Left/Right Balance

Commands MC-8 to set the Zone 2 balance to the value in this packet.
© 2003 Lexicon, Inc. All rights reserved.
Unsigned 8 bit integer
Appendix I MC-1 to MC-8 Effect ID
MC_CMD_SET_ZONE2_VOLUME
Value
Signed 8 bit integer (2's compliment)
+12 (0x0C) (12dB)
-80 (0xB0) (-80 dB)
Printed on: 04/01/03
Map.
0x45
0x01
nn
45 of 80