Table of Contents
Advertisement
Lexicon, Inc.
MC-8 Serial Communications Protocol
6.3.2.2 MC-8 Response
The MC-8 will reset, clear any saved system and effect parameters in Nonvolatile RAM, and restore the factory
default system and effect parameters. After reset the MC-8 will go through a soft power-up initialization. This
includes transmitting the "Wakeup Notification Packet".
6.3.3 MC-1 Send IR Command
Transmits MC-1 IR command key codes to the MC-8.
This command has been maintained for backward compatibility to the MC-1. The MC-1 IR code functionality has
been mapped to the MC-8 IR code functionality as per the MC-1 to MC-8 IR code table. MC-8 users should use the
command described in
6.3.27
6.3.3.1 Command Packet Description
6.3.3.2 Data Description
KeyCode:
Data Type:
Valid Values:
6.3.3.3 MC-8 Response
The KeyCode is processed as a valid IR code. No acknowledgment will be sent from MC-8.
6.3.3.4 Data Validation
The KeyCode data will be verified as a legal IR code. If the Code is not valid the MC-8 will not respond.
6.3.4 Get Unit Configuration
Request to MC-8 for its current unit configuration.
This command is supported for backward compatibility. MC-8 users should use the command described in
(MC-8_Get_Unit_Configuration). MC-8 will respond with "Unit Configuration Packet". The HOST should use this
information to determine if any information saved by the HOST is current.
6.3.4.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
© 2003 Lexicon, Inc. All rights reserved.
(MC-1_Send_IR_Command).
Application Header:
Command
DC_CMD_IR
Data Count
1
Application Data:
Data[0]
KeyCode
Unsigned 8 bit integer
Appendix C MC-1 IR-Codes
DC_CMD_GET_CONFIG
0
N/A
Printed on: 04/01/03
0x14
0x01
nn
0x15
0x00
6.3.26
14 of 80
Advertisement
Table of Contents
