Mc-8 Set Input Name By Id - Lexicon MC-8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-4 Manual

Lexicon, Inc.
MC-8 Serial Communications Protocol
6.3.40.4 Input Name Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]- Data[DataCount-1] InputName
6.3.40.5 Data Description
InputId:
Data Type:
Definition/Conversion:
InputName:
Data Type:
Max Length:

6.3.41 MC-8 Set Input Name by Id

Sets an Input Name to the transmitted value for a given input.
6.3.41.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]-Data[DataCount-1]
6.3.41.2 Data Description
InputId:
Data Type:
Description/Conversion:
InputName:
Data Type:
Max Length:
6.3.41.3 MC-8 Response
MC-8 will copy the InputName to the given input.
6.3.41.4 Data Validation:
The InputId must be a valid Input Id. If it is not the MC-8 will respond with a NAK packet and error code
DC_INVALID_INPUT. If the InputName string exceeds the INPUT_NAME_LENGTH, the MC-8 will truncate
the string to the INPUT_NAME_LENGTH.
© 2003 Lexicon, Inc. All rights reserved.
MC_RESP_INPUT_NAME
Number of Characters in
InputName + 2
InputId
Unsigned 8 bit Integer
Appendix F MC-8 Input Ids
Null (0x00) terminated ASCII character string.
INPUT_NAME_LENGTH defined in
MC_CMD_SET_INPUT_NAME 0x48
Number of characters in
InputName + 2
InputId
InputName
Unsigned 8 bit Integer
Appendix F MC-8 Input Ids
Null (0x00) terminated ASCII character string.
INPUT_NAME_LENGTH defined in
Printed on: 04/01/03
0x96
nn
nn
ch ch ch ... 0x00
Appendix G Protocol Constants.
nn
0 to 7
ch ch ch ... 0x00
Appendix G Protocol Constants.
47 of 80