Mc-8 Parameter Get Value String By Id - Lexicon MC-8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-4 Manual

Lexicon, Inc.
MC-8 Serial Communications Protocol
If ParamId exceeds the its maximum value, the MC-8 will ignore the command and transmit a DC_NAK
command with an error code DC_INVALID_PARAM_ID.
6.3.29.4 MC-8 Response
If a parameter has been enabled for notification the MC-8 will transmit its current value whenever it has
been changed due to any user or system action. For the details of the MC-8 notification packet, see
(MC8_Parameter_Notification_By_Id).

6.3.30 MC-8 Parameter Get Value String by Id

Request to MC-8 for the string representation of a given value for a given parameter. The MC-8 will respond with a
"Value String Response Packet".
6.3.30.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2] - Data[22]
6.3.30.2 Data Description
ParamId:
Data Type:
Max:
Value:
See MC8_Value_Union_Description.
6.3.30.3 Data Validation
If ParamId exceeds the its maximum value, the MC-8 will ignore the command and transmit a DC_NAK
command with an error code DC_INVALID_PARAM_ID.
6.3.30.4 MC-8 Value String Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0] - Data[20]
6.3.30.5 Data Description
Value String:
© 2003 Lexicon, Inc. All rights reserved.
MC_CMD_PARAM_GET_VALUE_STRING_BY_ID 0x3C
23
ParamId (LSB)
ParamId (MSB)
Value[0] - Value[20]
Unsigned 16 bit integer.
Max Parameter Count as reported by the MC-8 Unit Configuration
Response Packet in 7.3.39.2
MC_RESP_VALUE_STRING
Number of Characters in Value
String + 1
Value String
Printed on: 04/01/03
6.1.5
0x17
nn
nn
nn nn
nn ..
0x93
nn
ch ch ch
... 0x00
39 of 80