Deleting A Backup - Intel SS4000-E - Entry Storage System NAS Server User Manual

Managing Your Storage System
To configure remote boot:
1. In the navigation bar, click Backups.
2. In the Computer name list in the Remote boot group box, select the name of the
computer whose backup you want to remotely boot from.
3. If you are remotely booting the computer from its own backup, do not change the
MAC address. However, if you are booting a different computer from the selected
computer's backup, enter the MAC address of the NIC of the computer that you want
to remotely boot in the MAC address text box.
Remote boot must have been previously enabled on that computer.
4. From the Backup for booting remotely list, select the time and date of the backup
that you want to remotely boot from.
To always boot from the most recent backup, select Latest backup.
An asterisk (*) identifies the backup that is used for booting remotely.
Notes:
— You can remotely boot only from backups that were created after remote boot was
— If the selected backup is deleted to make room for newer backups, the most recent
5. Click Apply Boot Info.
6. When the confirmation message displays, click OK.
If you changed the backup for booting remotely, an asterisk displays next to the
selected backup.

Deleting a Backup

You can delete all backups for a given disk, but you cannot delete just an individual
backup from a specific date and time.
Note: If you delete all backups of all disks for a particular computer, that computer no longer
displays on the Backups page. However, that computer name remains in the storage
system and counts toward the total number of computers that are allowed to back up to the
storage system. If you want to delete all backups of all disks and the computer name, see
"Deleting a Client" on page
To delete all backups of a disk:
1. In the navigation bar, click Backups.
2. Select the radio button adjacent to the disk whose backups you want to delete in the
second Select column.
3. Click Delete Backup.
4. When prompted to confirm the deletion, click OK.
60
enabled on the client computer.
backup is used for booting remotely.
61.
®
Intel Entry Storage System SS4000-E User Guide