Starting Intel ® Client Backup And Recovery - Intel SS4000-E - Entry Storage System NAS Server User Manual

14. Enter the key code for licensing the product and click OK. The license key code is
located on the back of the storage system.
If you have an Internet connection, the license is activated automatically. When you
click OK on the confirmation message, the Protect a Disk wizard starts. For
information about this wizard, see
Note: If you previously used this key code on a different computer, an error message
If your Internet connection is temporarily down, or if this computer does not have an
Internet connection, click OK on the warning message. The Protect a Disk wizard still
starts, but after 30 days, you no longer can perform backups or recovery until you
activate the license. For more information, see
®
Starting Intel Client Backup and Recovery
To start Intel
•
Click Start > Programs > Client Backup and Recovery
•
If the Intel
presence of the Agent icon (
If you did not protect a disk after installing Intel
restarting your computer, you are prompted to do so the first time you run this application.
For information about this wizard, see
®
Intel Entry Storage System SS4000-E User Guide
displays, and you must re-activate your license. For more information, see
"Activating Your License" on page
®
Client Backup and Recovery, do either of the following
®
Client Backup and Recovery Agent is running as indicated by the
"Protecting Your Disks" on page
96.
"Activating Your License" on page
) in the system tray, double-click this icon.
®
Client Backup and Recovery and
"Protecting Your Disks" on page
Protecting Local Disks
98.
96.
98.
95