Replacing Your Existing License; Protecting Your Disks - Intel SS4000-E - Entry Storage System NAS Server User Manual

Protecting Local Disks

Replacing Your Existing License

To replace your existing license:
1. From the Action menu, click License > Add License. The Add License dialog box
displays your current license key code.
2. In the License key code text box, enter the new key code.
3. Click OK.
4. When the confirmation message displays, click OK. If your computer has an Internet
connection, the license is activated automatically. If your Internet connection is
temporarily down, your license is activated automatically the next time you run Intel
Client Backup and Recovery with a restored Internet connection. If this computer
does not have an Internet connection, you must perform an offline activation as
described in the previous section.

Protecting Your Disks

After you install Intel
Protect a Disk wizard runs automatically. Using this wizard, you can specify which disk or
partition you want to back up, where the backups should be stored, when automatic
backups, if any, should occur, and what password you want to use for the recovery CD or
booting remotely. If you cancel this wizard, you can start it again at any time using the
following procedure.
Before you protect a disk, it is recommended that you confirm that sufficient space is
available on the storage system. At least an additional 20% of the disk size is required for
changed data. For example, if the disk you want to protect is 15 GB, at least 18 GB of
space must be available on the storage system. The Home page in the Manager, described
in "Navigating the Manager" on page
To protect a disk:
1. Click Protect a Disk. The Protect a Disk wizard runs.
2. In the Available disks list, select the disk or partition you want to protect.
98
®
Client Backup and Recovery and restart your computer, the
28, displays the amount of available space.
Intel
®
Entry Storage System SS4000-E User Guide
®