Figure 15. Removing Drive Carrier From Storage System; Figure 16. Removing Baffle From Drive Carrier - Intel SS4000-E - Entry Storage System NAS Server User Manual

4. Press in the green latch at the end of the drive carrier to disengage the drive carrier
from the storage system. Pull out on the black lever to pull the drive carrier out of the
storage system.
5. Remove the four screws that attach the plastic baffle or defective hard disk to the
drive carrier. Two screws are located on each side of the drive carrier.
Note: Store the plastic baffle for future use.
®
Intel Entry Storage System SS4000-E User Guide
1
2
3
4

Figure 15. Removing Drive Carrier from Storage System

Figure 16. Removing Baffle from Drive Carrier

Hardware Installations and Upgrades
1
2
TP00928
TP000230
141