Changing The Backup Schedule - Intel SS4000-E - Entry Storage System NAS Server User Manual

Changing the Backup Schedule

When you protect a disk, you specify when you want backups to occur. However, you can
change this schedule at any time as long as the Status page indicates that the Status is
Normal. If protection is stopped, such as if you recovered the disk or recovered a different
partition on the same disk, you cannot change the disk schedule until you resume
protection by clicking Back Up Now.
To change the backup schedule:
1. Click Schedule.
2. In the Protected disk list, select the disk whose backup schedule you want to change.
3. Specify when you want backups to occur.
For example, if you want backups to occur every day, select Daily from the
Recurrence list. If you want backups to occur once a week, select the day of the week
from the Recurrence list and then select the time.
If you do not want backups to occur automatically, select Not Scheduled from the
Recurrence list. Backups occur only when you start one manually as described in
"Manually Backing up Your Disk" on page
4. Click Apply.
5. When the confirmation message displays, click Yes.
6. When the result message displays, click OK. The schedule change takes effect
immediately, and the date and time of the next scheduled backup displays in the Next
backup area.
®
Intel Entry Storage System SS4000-E User Guide
Protecting Local Disks
105.
107