Responding to RAID Failure
When disk removal/failure causes the entire RAID to fail, the Disk Change Notification
page displays when you access the Manager or refresh the browser window:
Take the appropriate action:
Scan the storage system again and
update the information on the page
Re-install the same disk
Reconfigure the storage system using
the available disks
®
Intel
Entry Storage System SS4000-E User Guide
To do this
Click Scan.
Click Shut Down.
After the storage system shuts down, re-install the same disk
and then restart the system.
NOTE: If you removed multiple disks, you must re-install
them in the opposite order than you removed them.
Click Reconfigure Disks and complete the system setup
pages as described in
"Configuring Your Storage System" on
page
21.
Caution:
Reconfiguring the storage system deletes all user
information and all data on all the disks.
Adding or Replacing Hard Disks
Do this
133