Attaching The Storage System To The Network; Figure 11. Connecting Storage System To Network - Intel SS4000-E - Entry Storage System NAS Server User Manual

Attaching the Storage System to the Network

To connect the storage system to your network, insert one end of the RJ-45 Ethernet cable
into the Ethernet port 1 on the back of the storage system. See letter "A" in the following
figure. Insert the other end of the RJ-45 Ethernet cable into a network port.
®
Intel Entry Storage System SS4000-E User Guide

Figure 11. Connecting Storage System to Network

A
2
1
K
AF000237
Getting Started
15