Konica Minolta bizhub 181 User Manual page 95

5
5
Type in the name of the destination, and then press the [OK] key.
6
Type in the e-mail address of the recipient.
– "OTHER SETTING=," appears only if fax kit FK-506 is installed,
the transmission size and resolution for sending Internet faxes can
be specified. These settings are applied when a transmission is
specified using the procedure for Internet fax transmissions. The
settings are not applied when a transmission is specified using the
procedure for Scan to E-mail transmissions. For details on the Scan
to E-mail operation, refer to "Performing a Scan to E-mail opera-
tion" on page 6-1.
For details on Internet faxing, refer to the User's Guide for fax kit
FK-506.
7
Press the [OK] key.
After the message "REGISTERED" appears, the "DIAL REGISTRA-
TION" menu appears again.
5-6
Registering destinations
NC-503