Konica Minolta bizhub 181 User Manual page 106

Registering destinations
3
Press the [,] or [+] key until "GROUP DIAL" is selected, and then press
the [OK] key.
4
Press the one-touch dial key programmed with the group to be edited
or deleted.
After the registered information is displayed, the following screen ap-
pears.
– If a one-touch dial destination or program is registered with the se-
lected one-touch dial key, the message "NOT ACCEPTED" ap-
pears, and then the "DIAL REGISTRATION" menu appears.
5
Press the [,] or [+] key until "EDIT" or "DELETE" is selected.
– If "DELETE" was selected and the [OK] key is pressed, the message
"DELETED" appears, and then the "DIAL REGISTRATION" menu
appears again.
6
To edit the information, select "EDIT", and then press the [OK] key.
The name of the registered destination is displayed.
NC-503
5
5-17