Konica Minolta bizhub 181 User Manual page 15

1
No. Part name
22 [Fax] key/indicator
23 [Scan] key/indicator
24 [Copy] key/indicator
25 [123/ABC] key
26 [Reset] key
27 [Interrupt] key/indicator
1-4
22 23 24
30
25 26
29
Description
Press to enter Fax mode. The indicator on the
key lights up in green to indicate that the ma-
chine is in Fax mode.
Press to enter Scan mode. The indicator on
the key lights up in green to indicate that the
machine is in Scan mode. (Available only
when network interface card NC-503 and im-
age controller IC-206 are installed)
Press to enter Copy mode. The indicator on
the key lights up in green to indicate that the
machine is in Copy mode.
Press to switch between number input mode
and letter input mode.
• Press to cancel all settings.
• The currently specified job is canceled.
(Pressing this key does not switch the ma-
chine to Copy or Fax mode.)
Press to enter Interrupt mode. The indicator
on the key lights up in green to indicate that
the machine is in Interrupt mode.
Press the key again to cancel Interrupt mode
and return to the mode before Interrupt mode
was entered.
If this key is pressed while a received fax or
computer document is being printed, printing
stops so that the interrupting copy job can be
performed. Press this key again to continue
printing the received fax or computer docu-
ment.
Getting ready
27
28
NC-503