Specifying The Pop Before Smtp Setting - Konica Minolta bizhub 181 User Manual

4

Specifying the POP before SMTP setting

1
In the "E-MAIL SETTING 1" menu, press the [,] or [+] key until "POP
BEFORE SMTP" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "OFF" or "ON" is selected, and then press
the [OK] key.
– If "OFF" is selected, the message "ACCEPTED" appears, and then
the "E-MAIL SETTING 1" menu appears again.
– If "ON" is selected, specify the length of time (in seconds) for POP
before SMTP. Specify the number of seconds, and then press the
[OK] key. The message "ACCEPTED" appears, and then the "E-
MAIL SETTING 1" menu appears again.
– The period can be set between 0 and 60 seconds.
4-26
Network settings
NC-503