Konica Minolta bizhub 181 User Manual page 162

Performing a Scan to Server (FTP) operation
When "MANUAL" is selected
Note
If "MANUAL" was selected, the scanning size can be changed.
The settings available for the scanning size are METRIC ("A3w", "A4w",
"A4v", "A5w", "A5v", "B4w", "B5w", "B5v", "FLSw", "8Kw", "16Kw",
"16Kv") and INCH ("11×17", "11×14", "LGLw", "LTRw", "LTRv", "IN-
Vw" and "INVv").
1
If "MANUAL" was selected in step 6 and the [OK] key is pressed, the
following screen appears.
2
Press the [,] or [+] key until the appropriate scanning size is selected,
and then press the [OK] key.
The selected scanning size appears.
3
Press the [OK] key.
The message "SCANNING" appears, and the following screen appears
when scanning is finished.
NC-503
7
7-9