Specifying The Gateway Transmission Setting - Konica Minolta bizhub 181 User Manual

Network settings
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.

Specifying the gateway transmission setting

1
In the "NETWORK SETTING" menu, press the [,] or [+] key until
"GATEWAY TX" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
– Whether "DISABLE" or "ENABLE" is selected, the message "AC-
CEPTED" appears, and then the "NETWORK SETTING" menu ap-
pears again.
Note
The setting for gateway transmissions appears when optional fax kit FK-
506 is installed.
NC-503
4
4-13