Konica Minolta bizhub 181 User Manual page 63

4
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
– If "DISABLE" is selected, the message "ACCEPTED" appears, and
then the "NETWORK SETTING" menu appears again.
– If "ENABLE" was selected, a screen appears, allowing you to spec-
ify the IP address of the DNS server. Continue with step 3.
3
Use the keypad to type in the IP address of the DNS server.
– For the IP address of the DNS server, consult with the network ad-
ministrator.
4
Press the [OK] key.
After the message "ACCEPTED" appears, the "NETWORK SETTING"
menu appears again.
5
Press the [Reset] key in the control panel.
– After the screen shown above appears, turn the machine off, then
on again to restart it.
4-12
Network settings
NC-503