Specifying The E-Mail Address Of The Sender - Konica Minolta bizhub 181 User Manual

Network settings

Specifying the e-mail address of the sender

1
In the "E-MAIL SETTING 1" menu, press the [,] or [+] key until "E-MAIL
ADDRESS" is selected, and then press the [OK] key.
2
Type in the e-mail address of the sender.
– The e-mail address can contain a maximum of 64 characters.
– If this machine will not be used to receive e-mail messages, enter
the e-mail address of the administrator.
– Be sure to first obtain from the network administrator the e-mail ad-
dress to be registered with the machine.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "E-MAIL SETTING 1"
menu appears again.
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
NC-503
4
4-21