Connecting The Ipp Printing Netware Server And This Machine - Konica Minolta bizhub 181 User Manual

Network printing

Connecting the IPP printing NetWare server and this machine

Connecting the NetWare server and this machine
NetWare version
NetWare 4.x
NetWare 5.x / 6
Specifying the NetWare 4.x/5.x/6 print server mode settings
1
Log on with Administrator privileges.
2
Start up NWadmin.
3
Select the print server system or category container, and then select
"Print service quick setup" from the tool menu.
4
Type in the print server name, printer name, print queue name and vol-
ume name, select "Other/Unknown" as the printer type, and then save
the specified settings.
– For queue user privileges, the printer notification option, assign-
ment of multiple queues, and passwords, refer to the NetWare doc-
umentation, and specify settings as necessary.
5
Start up PageScope Web Connection, click the Network tab in Admin-
istrator mode, select "NetWare Configuration", and then specify the
following settings for this machine.
– For details on using PageScope Web Connection, refer to "Using
PageScope Web Connection" on page 8-1.
6
From the NetWare Server console, load MONITOR.NLM.
7
Select the connection settings, and check that the PServer you created
is listed in the active connections section.
Parameter
NetWare Configuration*
Frame Type*
Print Server Name
NDS Context Name
Print Server Password
NC-503
Protocol
IPX
IPX
TCP/IP
NDS
Enable NetWare (Select the check box to enable it.)
AutoDetect (Select the frame type according to the network en-
vironment.)
Print server name created in step 4
Name of the context that con-
nects to PServer
Specify only when setting from the NetWare Server.
Emulation
NDS / Bindery
NDS / Bindery
Bindery
Not necessary to specify
2
Service mode
Pserver / Nprinter
Pserver / Nprinter
NDPS(lpr)
2-21