Specifying Settings From The Control Panel - Konica Minolta bizhub 181 User Manual

4
4.2

Specifying settings from the control panel

The network settings can be specified from the control panel of this machine.
To specify the network settings from the control panel of the machine, press
the [Utility] key, and then specify settings for the various menu parameters
available from the "ADMIN. MANAGEMENT" menu in Utility mode.
Settings can be specified for the following network-related parameters in the
"ADMIN. MANAGEMENT" menu.
Menu
NETWORK SETTING
E-MAIL SETTING 1
E-MAIL SETTING 2
USER SETTING
1
* These items can be displayed only IP ADDRESS SETTING is set to "SPEC-
IFY".
2
* Can be specified if network interface card NC-503 or image controller IC-
206 is installed on the machine while fax kit FK-506 is not installed.
4-6
Submenu
IP ADDRESS SETTING
SUBNET MASK*1
GATEWAY*1
DNS CONFIG
GATEWAY TX
WEB SETTING
LPD SETTING
SLP SETTING
SNMP SETTING
SENDER NAME
E-MAIL ADDRESS
SMTP SERVER ADDRESS
SMTP PORT NO.
SMTP TIMEOUT
TEXT INSERT
DEFAULT SUBJECT
POP BEFORE SMTP
POP3 SERVER ADDRESS
POP3 PORT NO.
POP3 TIMEOUT
POP3 ACCOUNT
POP3 PASSWORD
NTP SERVER ADDRESS*
2
TIME ZONE*
Network settings
Parameter
AUTO / SPECIFY
-
-
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
-
-
-
1 to 65535
30 to 300 seconds
OFF / ON
-
OFF / ON (0 to 60 seconds)
-
1 to 65535
30 to 300 seconds
-
-
2
-
-
NC-503