Konica Minolta bizhub 181 User Manual page 46

Network printing
Parameter
NetWare Configuration*
Frame Type*
Print Server Name
NDS Context Name
Print Server Password
Password Retype
Preferred File Server
Preferred NDS Tree
Print Queue Scan Rate*
Mode*
Printer Number
Connection Mode
After changing the settings for parameters marked with an asterisk (*), turn
this machine off, then on again.
Specifying the NetWare 5.x/6 Novell Distributed Print Service (NDPS)
settings
Reminder
Before specifying NDS settings, make sure that NDPS Broker and NDPS
Manager have been created and loaded.
Check that the NetWare server is set to use the TCP/IP protocol.
Specify the IP address for the controller and check that it has started.
NC-503
NDS
Enable NetWare (Select the check box to enable it.)
AutoDetect (Select the frame type according to the network en-
vironment.)
Print server name created in step 4
Name of the context that con-
nects to PServer
Specify only when setting from the NetWare Server.
Specify only when setting from the NetWare Server.
Not necessary to specify
Name of the tree where Pserv-
er logs on
1 (Change as necessary.)
Nprinter
1 (Change according to the setting.)
Directory Services
Bindery
Not necessary to specify
Name of the file server that
connects to PServer
Not necessary to specify
Bindery
2
2-23