Konica Minolta bizhub 181 User Manual page 16

Getting ready
No. Part name
28 [Clear/Stop] key
29 [Start] key/indicator
30 Keypad
NC-503
Description
• Press to clear the entered number.
• Press to stop a continuous copy operation.
• Press to stop the transmission/reception of
the fax.
• Press to stop the print job from the compu-
ter.
• Press to start a copy operation.
• Press to start sending a fax.
• Press to start a scanning operation (with
push scanning).
• If this key is pressed while this machine is
warming up, the next copy job is queued.
• The key lights up in green to indicate that
jobs can be queued, and the key lights up
in orange to indicate that the machine is not
ready to begin copy operations.
• Use to type in the number of copies to be
produced.
• Use to type in the various settings.
• Use to specify the fax/scan destination.
• Used to type in speed dial numbers and
text.
• In Fax mode, the key is used for tone
transmissions (pulse dialing), and the # key
is used for accessing an outside line.
1
1-5