Konica Minolta bizhub 181 User Manual page 104

Registering destinations
4
Type in the speed dial number for the destination to be edited or delet-
ed, and then press the [OK] key.
After the registered information is displayed, the following screen ap-
pears.
5
Press the [,] or [+] key until "EDIT" or "DELETE" is selected.
– If "DELETE" was selected and the [OK] key is pressed, the message
"DELETED" appears, and then the "DIAL REGISTRATION" menu
appears again.
6
To edit the information, select "EDIT", and then press the [OK] key.
The name of the registered destination is displayed.
– To correct destination name, press the [Clear/Stop] to erase it, and
then type in the correct destination name.
The name of the registered destination is displayed.
7
Press the [OK] key.
The destination appears.
– To correct destination, press the [Clear/Stop] to erase it, and then
type in the correct destination.
NC-503
5
5-15