Konica Minolta bizhub 181 User Manual page 101

5
4
Press the one-touch dial key for the destination to be edited or deleted.
After the registered information is displayed, the following screen ap-
pears.
– If a group dial destination or program is registered with the selected
one-touch dial key, the message "NOT ACCEPTED" appears, and
then the "DIAL REGISTRATION" menu appears.
5
Press the [,] or [+] key until "EDIT" or "DELETE" is selected.
– If "DELETE" was selected and the [OK] key is pressed, the message
"DELETED" appears, and then the "DIAL REGISTRATION" menu
appears again.
6
To edit the information, select "EDIT", and then press the [OK] key.
The name of the registered destination is displayed.
– To correct destination name, press the [Clear/Stop] to erase it, and
then type in the correct destination name.
5-12
Registering destinations
NC-503