Connecting A Copier To The Netware Server; Supported Environments; Setting Up Netware 4.X/ 5.X/ 6 Print Server Mode - Konica Minolta Network Interface Card NC-6 User Manual

Connecting the Computer and Copier
7.2.5

Connecting a Copier to the NetWare Server

Supported Environments

The controller supports the system environments described below.
NetWare version
NetWare 4.x
NetWare 5.x/6

Setting Up NetWare 4.x/ 5.x/ 6 Print Server Mode

1
Log in with administrator privileges.
2
Start up NWadmin.
3
Select the print service system or category container, and then select
"Print service quick setup" from the Tool menu.
4
Enter settings into the
name, and
name, and then save the settings.
Note
Specify the users who can use the queue, printer options, number
of queues, and password. Refer to the NetWare documentation for
details.
5
Start up PageScope Light and log in to the Administrator mode, select
NetWare Configuration
PageScope Light to specify the following settings on the copier. (Refer
to "8 Using PageScope Light" for details.)
6
Load MONITOR.NLM using the NetWare server console.
NC-6
Protocol
IPX
IPX
TCP/IP
Print server
Volume name boxes, select
from the "Network" tab, and then use
Emulation Service mode
NDS / Bindery PServer / NPrinter
NDS / Bindery PServer / NPrinter
NDPS (lpr)
name, Printer name,
Other/Unknown
7
Print queue
under Type
7-9