Table of Contents
Advertisement
Effects and Parameters
GNX3000 Owner' s Manual
Detune
A Detuner makes a copy of your incoming signal, takes the copied signal slightly out
of tune from the original, and mixes the two signals together. The result is a doubling
type of effect as if two guitars were playing the same part together.
Parameter 1
KNOB 2 selects the Amount (
to the copied pitch in cents (100 cents equals 1 semitone). Ranges are from 24
cents below (
) to 24 cents above (
-24
Parameter 2
KNOB 3 adjusts the left/right balance of the detuned signal. Ranges from left 99
(
) to right 99 (
mod left 99
Knob 4
No function when Detune is selected.
Mod Level
KNOB 5 controls the level (
99.
Pitch Shift
A Pitch Shifter copies the incoming signal, then shifts the pitch of the copied note to a
different note. The shifted note is then mixed back with the original signal sounding as
if two guitars were playing parallel notes.
Parameter 1
KNOB 2 adjusts the Amount of Pitch Shift (
Ranges from 12 semitones below (
Parameter 2
KNOB 3 adjusts the left/right balance of the shifted pitch. Ranges from left 99
(
) to right 99 (
mod left 99
Knob 4
No function when Pitch Shift is selected.
Mod Level
KNOB 5 controls the level (
72
) of detuning applied
AMouNT
).
24
).
mod rght 99
) of the detuned note. Ranges from 0 to
mod levl
) in intervals of one semi-tone.
SHIFT
) to 24 semitones above (
-12
).
mod rght 99
) of the shifted pitch. Ranges from 0 to 99.
mod levl
).
24
Advertisement
Table of Contents
