Whammy - DigiTech GNX3000 Owner's Manual

Effects and Parameters
GNX3000 Owner' s Manual

Whammy

Whammy is an effect that uses the EXPRESSION PEDAL to bend the pitch of the
incoming signal, or add a bendable harmony with the original signal. As the
Pedal is moved, the note bends either up or down. When Whammy is selected, it is
automatically placed before the Amp Modeling as shown in the block diagram (see
page 50). The Whammy effect must be linked to the Expression Pedal in order to
function. See page 75 for more information on linking the EXPRESSION PEDAL.
Parameter 1
KNOB 2 selects the interval and direction of the pitch bend. Choices are as follows:
Whammy (no Dry Signal)
1 oct up
2 oct up
2nddown
rev2nddn
4th down
1 oct dn
2 oct dn
divebomb
Parameter 2
KNOB 3 provides a manual control of the Whammy Pedal (
Ranges from 0 to 99.
Knob 4
No function when the Whammy is selected.
Level
KNOB 5 adjusts the Whammy Mix (
in this module. Ranges from 0 to 99.
54
(one octave up)
(two octaves up)
(2nd down)
(2nd down
reversed pedal
action)
(one 4th down)
(one octave down)
(two octaves down)
(Dive Bomb)
Wham mix
Harmony Bends (Dry Signal
Added)
(a m3rd to a
m3->maj3
Maj3rd)
(a 2nd above to a
2nd->maj3
Maj3rd up)
(a Maj3rd above to a
3rd->4th
4th up)
(a 4th above to a
4th->5th
5th up)
(a 5th above to an
5th->oct
octave up)
(one octave up)
h oct up
(one octave down)
h oct dn
(one octave up to
octup->Dn
one octave down)
wham pdl
) of all of the pitch-altering effects
) position.